This product is suitable forprofessional use indental clinics. It includes a set of components for dental treatment, diagnosis and surgery.The unitincludesdentalchair,dental light,instrument tray,3-waysyringe,spittoonand watersystem,suction unit,X-rayviewerand footswitch.
MAIN FEATURES:
Model specifications
Comprehensive multipurpose dentaltreatment unit
Safety category
Category I
Type of protection
Type B
Power supply
Single-phase,three-wire,netpower
Voltage
C.A. 220V~230V
Power frequency
50Hz/60HZ
Input frequency
1200VA
TECHNICAL SPECIFICATIONS:
Rotational speed of turbine handpiece (not included) at high speed with no load (air pressure 0.22 MPa) ≥ 35 × 104 r / min
Rotational speed of turbine handpiece (not included) at low speed with no load (air pressure 0.30 MPa) ≥ 18 × 103 r / min
Operating lamp lighting: 8000 Ix ~ 15000 Ix
X-ray viewer lighting: ≥ 2000 Ix
Dental chair load capacity: ≥ 1323 N (135 kg)
Instrument tray load capacity: ≤ 5 Kg
Highest position of the chair from the ground: ≥ 700 mm
Lowest position of the chair from the ground: ≤ 500 mm
Range of movement of the backrest: 105 ° - 170 °
Extension range of the headrest: 120 mm
Highest tilt range of backrest: ≥ 12 °
Water heater temperature at a constant temperature: (40 ± 5) ° C
Workspace: length ≥4000 mm / width ≥2600 mm / height ≥2000 mm
WORKING CONDITIONS:
For proper operation, the air, water and power supply should meet the following conditions:
Air supply: Air pressure: 0.6 MPa - 0.80 MPa, flow> 50L/min, oil-free;
Water supply: water pressure 0.20 MPa-0.40 MPa, flow> 10 L/min, degree of rigidity <25 degrees.
Power supply: AC 220V ~ 230V, 50HZ/60Hz, 10A
Environmental temperature: 5-40 ° C, relative humidity 30% to 75%.
SPACENEEDED TO OPERATEOPTIMALLY:
Minimum length: 4000 mm
Minimum width: 2600 mm
Minimum height: 2000 mm
MODELS:
Ref. 914-ST-D303-AZ Blue
Ref. 914-ST-D303-VE Green
ACCESSORIES NOT INCLUDED, AVAILABLE ON OUR WEBPAGE:
914-COMP-ST-D303 Compressor for dental chair 914-ST-D303